Efficiency target<\/strong> — CoC Tier 2 is achievable but costs more than the legal minimum.<\/li>\n<\/ul>\nA realistic sequence for a custom programme: sample in a few weeks, then 5–6 weeks to first production<\/strong> after sample approval at Paiyi Power. Tooling, if a new enclosure is needed, is quoted separately and adds time up front but lowers unit cost. Plan certification in parallel with tooling rather than after it.<\/p>\nPayment terms, IP and contracts<\/h2>\n\n- Standard terms<\/strong> are a deposit with the balance before shipment; terms evolve as the relationship does.<\/li>\n
- Tooling ownership<\/strong> should be stated explicitly — who owns the mould and what happens if you move.<\/li>\n
- NDA<\/strong> before sharing your device specification, and IP clauses<\/strong> covering your tooling, artwork and design files.<\/li>\n
- Spare parts and repeat runs<\/strong> in writing, so a phase two matches phase one.<\/li>\n<\/ul>\n
Red flags<\/h2>\n\n- Refuses or stalls on a live factory video call.<\/li>\n
- Cannot produce a model-specific test report, only a generic “certificate”.<\/li>\n
- Quote is far below the market with no technical explanation of why.<\/li>\n
- Business licence entity does not match the invoicing entity.<\/li>\n
- Pushes you to skip samples and go straight to production.<\/li>\n
- No written position on change control or component substitution.<\/li>\n
- Claims certifications the product clearly cannot hold, such as blanket “PD 3.2 certified” on an older design.<\/li>\n<\/ul>\n
A practical six-step sourcing workflow<\/h2>\n\n- Write the specification first<\/strong> — output, connector, markets, efficiency target, volume, timeline.<\/li>\n
- Shortlist three suppliers<\/strong> and confirm which are actual factories.<\/li>\n
- Do the video walk-through<\/strong> and ask two technical questions you already know the answer to.<\/li>\n
- Order samples from two<\/strong> and test them yourself with a load and a scope.<\/li>\n
- Verify the certificates<\/strong> against your exact model numbers.<\/li>\n
- Place a pilot order<\/strong> before committing to the full programme.<\/li>\n<\/ol>\n
What Paiyi Power offers<\/h2>\n
\n\n\n| Item<\/th>\n | Detail<\/th>\n<\/tr>\n<\/thead>\n |
\n\nEntity<\/strong><\/td>\n| Shenzhen trading company established 2015; Huizhou factory established 2019; ~50 staff<\/td>\n<\/tr>\n | \nMOQ<\/strong><\/td>\n| From 200 pcs per model<\/td>\n<\/tr>\n | \nLead time<\/strong><\/td>\n| 5–6 weeks to first production<\/td>\n<\/tr>\n | \nCapacity<\/strong><\/td>\n| Up to 150,000 pcs\/month across 4 lines<\/td>\n<\/tr>\n | \nProcess<\/strong><\/td>\n| SMT subcontracted to qualified plants with incoming inspection; final assembly, ATE test, burn-in and 100% inspection in-house<\/td>\n<\/tr>\n | \nCertificates<\/strong><\/td>\n| CE \/ CB \/ FCC \/ ISO 9001<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n We build for brands that need mid-batch custom work — non-standard voltages, custom enclosures and connectors, and private-label programmes that a large OEM will not take on. Verifiable project references are available on request.<\/p>\n
\nFrequently asked questions about Chinese power adapter manufacturers<\/h2>\nHow do I verify a Chinese factory is real?<\/h3>\nLive video from the production floor, a business licence matching the address, and a model-specific test report you can check with the issuing lab.<\/strong> Those three catch almost everything.<\/p>\nIs a trading company always bad?<\/h3>\nNo, but know which you are using.<\/strong> A trader can suit very small orders; the risk is thinking you have factory-level control when you do not.<\/p>\nWhat is a realistic MOQ?<\/h3>\nFrom 200 pcs per model<\/strong> at a specialist factory like Paiyi Power. Large OEMs typically want tens of thousands.<\/p>\nShould I trust a certificate PDF?<\/h3>\nOnly if it names your model and carries a number you can verify.<\/strong> Family or generic certificates are not evidence about your SKU.<\/p>\nDo factories really subcontract SMT?<\/h3>\nYes, commonly — including reputable ones.<\/strong> What matters is incoming inspection of the boards plus in-house final assembly, test and QC.<\/p>\nHow long does a custom adapter take?<\/h3>\nSamples in a few weeks, then 5–6 weeks to first production<\/strong> after approval, plus tooling time if a new enclosure is needed.<\/p>\nIs the cheapest quote a red flag?<\/h3>\nOften.<\/strong> Very low pricing usually means a catalogue unit with your logo, or unspecified component downgrades. Ask what specifically makes it cheap.<\/p>\nHow do I protect my design?<\/h3>\nNDA before sharing specifications, written tooling ownership, and IP clauses covering artwork and design files.<\/strong> Get them before the first sample, not after.<\/p>\nCan I start with a small pilot order?<\/h3>\nYes, and you should.<\/strong> A pilot run before the full programme is the cheapest insurance available.<\/p>\n
\n | | | | | | |