{"id":1417,"date":"2026-09-15T19:16:48","date_gmt":"2026-09-15T11:16:48","guid":{"rendered":"https:\/\/www.paiyipower.com\/140w-charger-only-charging-at-100w\/"},"modified":"2026-09-15T19:16:48","modified_gmt":"2026-09-15T11:16:48","slug":"140w-charger-only-charging-at-100w","status":"publish","type":"post","link":"https:\/\/www.paiyipower.com\/pt\/140w-charger-only-charging-at-100w\/","title":{"rendered":"Carregador de 140W Carregando S\u00f3 a 100W? As Tr\u00eas Causas e Como Projetar para Elimin\u00e1-las"},"content":{"rendered":"<h1>140W Charger Only Charging at 100W? The Three Causes and How to Design Them Out<\/h1>\n<p><strong>Published:<\/strong> September 2026<br \/><strong>Reading time:<\/strong> 9 min<br \/><strong>Audience:<\/strong> charger and laptop brands, product and support engineers, and OEM\/ODM buyers who keep receiving &#8220;my 140W charger only charges at 100W&#8221; tickets<\/p>\n<p><strong>By Han \u2014 Paiyi Power<\/strong>, an OEM\/ODM power supply manufacturer and GaN charger OEM partner building custom and modified-standard supplies from 5W to 240W, from 200 pcs per model. <br \/><strong>Last updated: 15 September 2026.<\/strong><\/p>\n<hr>\n<div class=\"wp-block-rank-math-toc-block\" id=\"rank-math-toc\" style=\"background:#f5f7f8;border:1px solid #d9dee3;border-radius:6px;padding:16px 20px;margin:28px 0;\">\n<h2 style=\"font-size:18px;margin:0 0 10px;border:none;padding:0;\">Contents<\/h2>\n<nav>\n<ul style=\"margin:0;padding-left:20px;\">\n<li style=\"margin:4px 0;\"><a href=\"#direct-answer-why-does-a-140w-charger-charge-at-100w\">Direct answer: why is a 140W charger only charging at 100W?<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#the-three-causes-at-a-glance\">The three causes at a glance<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#cause-1-the-cable-is-not-an-epr-cable\">Cause 1: the cable is not an EPR cable<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#cause-2-the-device-never-negotiates-epr\">Cause 2: the device never negotiates EPR<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#cause-3-power-sharing-across-ports\">Cause 3: power sharing across ports<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#why-100w-is-the-wall\">Why 100W is the wall<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#what-epr-actually-requires\">What EPR actually requires<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#where-pd-32-and-avs-fit\">Where PD 3.2 and AVS fit<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#diagnosing-it-in-the-field\">Diagnosing it in the field<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#designing-it-out-cable-and-port-rules\">Designing it out: cable and port rules<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#designing-it-out-power-sharing-rules\">Designing it out: power sharing rules<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#what-to-print-in-the-spec-sheet\">What to print in the spec sheet<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#power-negotiation-specification-table\">Power negotiation specification table<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#frequently-asked-questions\">Frequently asked questions<\/a><\/li>\n<li style=\"margin:4px 0;\"><a href=\"#sources\">Sources<\/a><\/li>\n<\/ul>\n<\/nav>\n<\/div>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"direct-answer-why-does-a-140w-charger-charge-at-100w\">Direct answer: why is a 140W charger only charging at 100W?<\/h2>\n<p><strong>A 140W charger delivers 100W when one of three things is missing: the cable is not an EPR-rated, electronically marked 5A cable; the device does not negotiate an EPR voltage above 20V; or the charger has split its budget across multiple ports.<\/strong> 100W is the ceiling of the standard power range, and crossing it requires every link in the chain \u2014 charger, cable and device \u2014 to agree.<\/p>\n<p>The most common single cause is the cable, because a 100W cable looks identical to a 240W cable and costs a third as much. The second is a device that simply does not request the higher voltage. The third is your own product&#8217;s power-sharing logic working exactly as designed.<\/p>\n<p>For any team building these products, the goal is not to explain the ticket but to design it out. At Paiyi Power we build these from 200 pcs per model, with samples in about a week and first production in 5\u20136 weeks after approval.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"the-three-causes-at-a-glance\">The three causes at a glance<\/h2>\n<p>Start here: the symptom is identical, but the fix is completely different depending on which link failed.<\/p>\n<table style=\"border-collapse: collapse; width: 100%; margin: 18px 0; font-size: 15px;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #d9dee3; padding: 9px 11px; background: #f5f7f8; text-align: left;\">Cause<\/th>\n<th style=\"border: 1px solid #d9dee3; padding: 9px 11px; background: #f5f7f8; text-align: left;\">Symptom detail<\/th>\n<th style=\"border: 1px solid #d9dee3; padding: 9px 11px; background: #f5f7f8; text-align: left;\">Fix<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Cable is not EPR<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Caps at exactly 100W even with a capable device<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Use an e-marked 5A EPR cable<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Device does not request EPR<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Caps at whatever the device accepts, sometimes 65W<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Nothing to fix \u2014 it is the sink&#8217;s limit<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Shared port budget<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Higher power only with a single port populated<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Understand the allocation table, or reserve a port<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Two of the three are cable-and-protocol issues. The third is a design decision that has to be documented or it becomes a support ticket.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"cause-1-the-cable-is-not-an-epr-cable\">Cause 1: the cable is not an EPR cable<\/h2>\n<p>This is the cause in the majority of cases, and it is invisible to the eye.<\/p>\n<ul>\n<li><strong>Electronically marked.<\/strong> Above certain current levels the cable must carry an e-marker chip that reports its rating to the charger. Without a valid e-marker, the charger must assume the lowest safe rating and will not exceed the standard range.<\/li>\n<li><strong>5A, not 3A.<\/strong> Higher power at higher voltage needs the 5A path. A 3A cable hits a hard ceiling no matter how capable the charger and laptop are.<\/li>\n<li><strong>EPR-rated insulation and connector.<\/strong> EPR voltages run up to 48V, so the cable must be built for that insulation class and to the revised mechanical requirements of the Type-C specification. A standard cable may physically fit and still not be rated for the voltage.<\/li>\n<li><strong>External appearance tells you nothing.<\/strong> Both cables are the same size, same connectors, same colour. This is why the ticket keeps arriving.<\/li>\n<\/ul>\n<p>The practical takeaway for a brand: if you ship a 140W charger without a 240W-rated cable, you will generate support tickets for a product that is working perfectly.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"cause-2-the-device-never-negotiates-epr\">Cause 2: the device never negotiates EPR<\/h2>\n<p>Power delivery is a negotiation, and both sides have to want the same thing.<\/p>\n<ul>\n<li><strong>The sink sets the ceiling.<\/strong> A laptop that only requests 20V will draw 100W at most, because that is the limit of the standard power range. The charger cannot push more than it is asked for.<\/li>\n<li><strong>EPR is opt-in and requires explicit agreement.<\/strong> Even on capable hardware, the device must ask for the higher voltage band; if the handshake does not complete, the system falls back to the standard range silently.<\/li>\n<li><strong>Battery state and thermal policy override everything.<\/strong> A nearly full battery, a hot chassis or a user power profile can hold charging well below the adapter&#8217;s capacity. Users read that as &#8220;the charger is weak&#8221;, but it is the device protecting itself.<\/li>\n<\/ul>\n<p>For support teams, the diagnostic question is simple: does the same cable and charger reach full power on another device? If yes, the sink is the limit, not your product.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"cause-3-power-sharing-across-ports\">Cause 3: power sharing across ports<\/h2>\n<p>This cause is your own product, and it is working correctly.<\/p>\n<p>A multi-port charger has a fixed total budget. Plug a phone into the second port and the charger re-allocates: the laptop port drops, the phone gets what it needs, and the total stays inside the supply&#8217;s limit.<\/p>\n<ul>\n<li><strong>The rated wattage applies to one specific configuration.<\/strong> &#8220;140W&#8221; usually means 140W on one port alone; the same product might offer 100W plus 30W with two ports occupied.<\/li>\n<li><strong>Re-negotiation causes a visible dip.<\/strong> When the second device is plugged in, the laptop briefly loses its contract and renegotiates lower \u2014 some users see that as a fault.<\/li>\n<li><strong>Documentation prevents most of these tickets.<\/strong> A printed allocation table on the product or box removes the surprise.<\/li>\n<\/ul>\n<p>This is the one cause you fully control, and the fix costs nothing but a label.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"why-100w-is-the-wall\">Why 100W is the wall<\/h2>\n<p>The 100W ceiling is not arbitrary \u2014 it is the boundary between two voltage bands in the specification.<\/p>\n<table style=\"border-collapse: collapse; width: 100%; margin: 18px 0; font-size: 15px;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #d9dee3; padding: 9px 11px; background: #f5f7f8; text-align: left;\">Band<\/th>\n<th style=\"border: 1px solid #d9dee3; padding: 9px 11px; background: #f5f7f8; text-align: left;\">Voltage<\/th>\n<th style=\"border: 1px solid #d9dee3; padding: 9px 11px; background: #f5f7f8; text-align: left;\">Maximum power<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Standard Power Range (SPR)<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Up to 20V<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">100W<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Extended Power Range (EPR)<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">28V, 36V, 48V (plus adjustable modes)<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Up to 240W<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Everything above 100W lives in EPR, and EPR has stricter requirements for the cable, the connector and the negotiation. That is why the symptom is so often exactly &#8220;100W&#8221; \u2014 the system is not broken, it has simply fallen back to the highest band it can agree on.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"what-epr-actually-requires\">What EPR actually requires<\/h2>\n<p>If you are designing a 140W or 240W product, these are the links that must all be true at once. Any one of them failing puts you back at 100W.<\/p>\n<ul>\n<li><strong>The charger<\/strong> must offer EPR voltage profiles and hold the negotiated voltage under load.<\/li>\n<li><strong>The cable<\/strong> must be e-marked, rated for 5A and built for the higher insulation class.<\/li>\n<li><strong>The connector and its mechanical design<\/strong> must meet the revised specification for the higher voltage band.<\/li>\n<li><strong>The device<\/strong> must request EPR and have the input stage to accept it.<\/li>\n<li><strong>The firmware<\/strong> must handle re-negotiation gracefully when ports are added or the load changes.<\/li>\n<\/ul>\n<p>Because all five must hold, &#8220;140W&#8221; is best read as a system property rather than a charger property.<\/p>\n<figure style=\"width: 768px\" class=\"wp-caption alignnone\"><img fetchpriority=\"high\" decoding=\"async\" class=\"size-large wp-image-1082\" src=\"https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-ate-test.webp\" alt=\"140W charger only charging at 100W - ATE negotiation test before shipment\" width=\"768\" height=\"576\" srcset=\"https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-ate-test.webp 1600w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-ate-test-300x225.webp 300w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-ate-test-1024x768.webp 1024w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-ate-test-768x576.webp 768w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-ate-test-1536x1152.webp 1536w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><figcaption class=\"wp-caption-text\">100% ATE functional test before shipment \u2014 every unit, not a sample.<\/figcaption><\/figure>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"where-pd-32-and-avs-fit\">Where PD 3.2 and AVS fit<\/h2>\n<p>PD 3.2 is the revision that extended adjustable-voltage operation into the standard power range, and it is worth understanding because it changes what &#8220;efficient charging&#8221; means below 100W.<\/p>\n<ul>\n<li><strong>Adjustable Voltage Supply (AVS).<\/strong> AVS allows the supply to be tuned in fine steps rather than jumping between fixed profiles, so the charger can match the device&#8217;s ideal input more closely and waste less as heat.<\/li>\n<li><strong>SPR AVS versus EPR AVS.<\/strong> The earlier revision introduced AVS for the extended range at higher voltages; PD 3.2 brought AVS into the standard range, roughly 9V to 20V in small steps, within the 100W band.<\/li>\n<li><strong>Why it matters commercially.<\/strong> AVS reduces heat and improves efficiency at the powers most devices actually use, which is a design benefit rather than a headline wattage.<\/li>\n<\/ul>\n<p>We design to the PD 3.2 specification, including SPR AVS. To be precise about what that means: we build to the specification, and certification status varies by SKU and by production batch \u2014 some earlier units were certified to the prior revision. We do not claim USB-IF certification or a TID, and any brand shipping under its own name should plan certification per model and per market. Our <a href=\"https:\/\/www.paiyipower.com\/usb-pd-3-2-spr-avs-vs-pd-3-1\/\">guide to what changed between PD 3.1 and PD 3.2<\/a> covers the engineering detail.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"diagnosing-it-in-the-field\">Diagnosing it in the field<\/h2>\n<p>A support engineer can separate the three causes in about two minutes, without a protocol analyser.<\/p>\n<ul>\n<li><strong>Swap the cable first.<\/strong> If a known-good e-marked 5A cable reaches full power, the cause was the cable in the vast majority of cases.<\/li>\n<li><strong>Then swap the device.<\/strong> If the same combination reaches full power on another laptop, the ceiling is the original device, not the charger.<\/li>\n<li><strong>Then unplug the other ports.<\/strong> If full power returns with a single port populated, the cause is power sharing working as designed.<\/li>\n<li><strong>Check what the device reports.<\/strong> Many operating systems expose the negotiated voltage and current, which settles the question immediately.<\/li>\n<\/ul>\n<p>In practice these three tests resolve nearly every ticket, and two of them point at something other than the charger.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"designing-it-out-cable-and-port-rules\">Designing it out: cable and port rules<\/h2>\n<p>If you are the brand, the cheapest fix is upstream of the customer.<\/p>\n<ul>\n<li><strong>Ship the right cable.<\/strong> Bundle an e-marked 5A EPR cable with every high-power charger, and mark the cable itself so it cannot be confused later.<\/li>\n<li><strong>Make the port unambiguous.<\/strong> If only one port supports the full rating, label it. A tiny printed mark removes a category of tickets.<\/li>\n<li><strong>Be conservative in the marketing number.<\/strong> Quoting the single-port peak without context guarantees complaints once a second device is plugged in.<\/li>\n<li><strong>Test the fallback path.<\/strong> Verify that a non-EPR cable degrades cleanly to 100W rather than dropping to 65W or failing to charge at all \u2014 that is what actually creates returns.<\/li>\n<\/ul>\n<p>Evaluating the first samples against these cases is exactly what a <a href=\"https:\/\/www.paiyipower.com\/power-adapter-sample-evaluation\/\">sample evaluation checklist<\/a> is for, and the change-control terms that keep them true in production belong in the <a href=\"https:\/\/www.paiyipower.com\/power-adapter-oem-agreement-guide\/\">OEM agreement<\/a>.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"designing-it-out-power-sharing-rules\">Designing it out: power sharing rules<\/h2>\n<p>Power sharing is where a good product is judged by its documentation as much as its hardware.<\/p>\n<ul>\n<li><strong>Publish the allocation table.<\/strong> Show each port combination and the resulting split, on the box and in the manual.<\/li>\n<li><strong>Prioritise the port that matters.<\/strong> A dedicated high-power port that keeps its rating when a phone is charging removes the most common complaint.<\/li>\n<li><strong>Avoid confusing re-negotiation.<\/strong> Briefly dropping the laptop&#8217;s contract is normal, but repeated drops under a stable load look like a fault; smooth the transition in firmware.<\/li>\n<li><strong>State the derating conditions.<\/strong> Ambient temperature and input voltage both affect what the charger can hold, and a stated derating curve turns an argument into a specification.<\/li>\n<\/ul>\n<p>None of this is exotic engineering. It is the difference between a product that is defended by a printed table and one that is defended by a support team.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"what-to-print-in-the-spec-sheet\">What to print in the spec sheet<\/h2>\n<p>Most of these tickets are documentation failures, so the fix belongs in the spec sheet as much as in the hardware. Include five things: the single-port maximum and the exact conditions for it; the power allocation table for every port combination; the cable rating required to reach the maximum; the ambient derating curve; and the supported power protocols stated as capability rather than certification.<\/p>\n<p>That last point matters for credibility. Write &#8220;designed to the USB Power Delivery 3.2 specification, including SPR AVS&#8221; rather than claiming a certification you may hold only on some models or batches.<\/p>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"power-negotiation-specification-table\">Power negotiation specification table<\/h2>\n<table style=\"border-collapse: collapse; width: 100%; margin: 18px 0; font-size: 15px;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #d9dee3; padding: 9px 11px; background: #f5f7f8; text-align: left;\">Parameter<\/th>\n<th style=\"border: 1px solid #d9dee3; padding: 9px 11px; background: #f5f7f8; text-align: left;\">Typical for 140W-class USB-C products<\/th>\n<th style=\"border: 1px solid #d9dee3; padding: 9px 11px; background: #f5f7f8; text-align: left;\">Note<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Protocol<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Designed to USB PD 3.2 including SPR AVS<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Capability statement, not a certification claim<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">SPR ceiling<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">100W at up to 20V<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">The wall users hit when a link fails<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">EPR<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Up to 48V \/ 240W with 5A e-marked cable<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Requires charger, cable and device to agree<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Cable<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">E-marked, 5A, higher insulation class<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">The most common single cause of the 100W ticket<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Multi-port<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Allocation table per port combination<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Publish it or explain it in support<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Thermal<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Derating curve at ambient and low input voltage<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Turns an argument into a specification<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Fallback<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Clean degradation to 100W with a non-EPR cable<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Verify it, do not assume it<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Reliability<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">100% ATE + burn-in; written change control<\/td>\n<td style=\"border: 1px solid #d9dee3; padding: 9px 11px;\">Protocol behaviour must not drift between batches<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<figure style=\"width: 768px\" class=\"wp-caption alignnone\"><img decoding=\"async\" class=\"size-large wp-image-1083\" src=\"https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-aging-chamber.webp\" alt=\"Aging test chamber rack for high-power USB-C chargers\" width=\"768\" height=\"349\" srcset=\"https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-aging-chamber.webp 1600w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-aging-chamber-300x136.webp 300w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-aging-chamber-1024x465.webp 1024w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-aging-chamber-768x348.webp 768w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-aging-chamber-1536x697.webp 1536w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><figcaption class=\"wp-caption-text\">Burn-in on the aging rack \u2014 where marginal units are found before they ship.<\/figcaption><\/figure>\n<figure style=\"width: 768px\" class=\"wp-caption alignnone\"><img decoding=\"async\" class=\"size-large wp-image-1081\" src=\"https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-smt-line.webp\" alt=\"Hand assembly and QC line building high-power USB-C chargers\" width=\"768\" height=\"576\" srcset=\"https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-smt-line.webp 1600w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-smt-line-300x225.webp 300w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-smt-line-1024x768.webp 1024w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-smt-line-768x576.webp 768w, https:\/\/www.paiyipower.com\/wp-content\/uploads\/2026\/09\/pyi-factory-smt-line-1536x1152.webp 1536w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><figcaption class=\"wp-caption-text\">Hand assembly and QC \u2014 where labelling and final inspection are done.<\/figcaption><\/figure>\n<hr>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"frequently-asked-questions\">Frequently asked questions<\/h2>\n<h3 style=\"margin-top: 24px; color: #2f6b4f;\">Why does my 140W charger only charge at 100W?<\/h3>\n<p><strong>Almost always one of three things: a cable that is not an e-marked 5A EPR cable, a device that does not negotiate EPR, or power sharing with another port occupied.<\/strong> 100W is the top of the standard power range, and going above it needs the charger, cable and device to agree.<\/p>\n<h3 style=\"margin-top: 24px; color: #2f6b4f;\">How can I tell if my cable is the problem?<\/h3>\n<p><strong>Try a known-good e-marked 5A cable.<\/strong> Ordinary and EPR cables look identical, so swapping the cable is the fastest test \u2014 and the cable is the cause in most cases.<\/p>\n<h3 style=\"margin-top: 24px; color: #2f6b4f;\">Is 100W the maximum for USB-C charging?<\/h3>\n<p><strong>No \u2014 100W is the maximum of the standard power range.<\/strong> The extended power range goes much higher, up to 240W, but requires EPR-capable hardware at every link in the chain.<\/p>\n<h3 style=\"margin-top: 24px; color: #2f6b4f;\">Does a 100W cable limit a 140W charger?<\/h3>\n<p><strong>Yes, and it is the most common cause of this exact complaint.<\/strong> The charger will only deliver what the cable is rated and marked for, so a 100W cable caps the system no matter how capable the charger is.<\/p>\n<h3 style=\"margin-top: 24px; color: #2f6b4f;\">Why does charging drop when I plug in a second device?<\/h3>\n<p><strong>Because the charger has a fixed total budget and re-allocates it across ports.<\/strong> The rated wattage usually applies to a specific port configuration \u2014 often a single port \u2014 so the drop is the design working correctly, not a fault.<\/p>\n<h3 style=\"margin-top: 24px; color: #2f6b4f;\">Can firmware fix this?<\/h3>\n<p><strong>Partly.<\/strong> Firmware governs how gracefully the charger re-negotiates and how cleanly it falls back, but it cannot exceed what the cable or device allows. Cutting a support ticket is a documentation job as much as a firmware job.<\/p>\n<h3 style=\"margin-top: 24px; color: #2f6b4f;\">What is SPR AVS and does it help here?<\/h3>\n<p><strong>SPR AVS is adjustable-voltage operation within the standard power range, added in the PD 3.2 revision, that lets the charger fine-tune voltage in small steps.<\/strong> It improves efficiency and reduces heat below 100W, though it does not raise the 100W ceiling itself.<\/p>\n<h3 style=\"margin-top: 24px; color: #2f6b4f;\">Do we need to claim PD 3.2 certification on the product page?<\/h3>\n<p><strong>No \u2014 and we recommend against blanket certification claims.<\/strong> Write that the product is designed to the PD 3.2 specification including SPR AVS, and state certification per model and market, because status varies by SKU and batch.<\/p>\n<h3 style=\"margin-top: 24px; color: #2f6b4f;\">What MOQ and lead time apply for custom high-power chargers?<\/h3>\n<p><strong>From 200 pcs per model at Paiyi Power, with samples in about a week and first production 5\u20136 weeks after sample approval.<\/strong> Fix the protocol, cable and power-sharing behaviour before tooling; see <a href=\"https:\/\/www.paiyipower.com\/usb-pd-3-2-vs-pd-3-1-140w-laptop-chargers\/\">what changes for 140W laptop chargers<\/a> and our <a href=\"https:\/\/www.paiyipower.com\/usb-pd-3-2-certification\/\">certification planning guide<\/a>.<\/p>\n<hr>\n<h2 style=\"border-bottom: 2px solid #1264a3; padding-bottom: 6px; margin-top: 36px;\" id=\"sources\">Sources<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.usb.org\/\" rel=\"noopener\" target=\"_blank\">USB-IF \u2014 USB Power Delivery specification and Type-C cable requirements<\/a><\/li>\n<li><a href=\"https:\/\/www.iec.ch\/\" rel=\"noopener\" target=\"_blank\">IEC \u2014 62368-1 safety for IT and audio\/video equipment<\/a><\/li>\n<li><a href=\"https:\/\/www.fcc.gov\/\" rel=\"noopener\" target=\"_blank\">FCC \u2014 Part 15 rules (Class A \/ Class B digital devices)<\/a><\/li>\n<li><a href=\"https:\/\/www.ul.com\/\" rel=\"noopener\" target=\"_blank\">UL \u2014 safety certification for power supplies and chargers<\/a><\/li>\n<li><a href=\"https:\/\/www.energy.gov\/eere\/buildings\/external-power-supplies\" rel=\"noopener\" target=\"_blank\">U.S. DOE \u2014 External Power Supply efficiency (Level VI)<\/a><\/li>\n<\/ul>\n<p><em>Related on this blog: <a href=\"https:\/\/www.paiyipower.com\/usb-pd-3-2-spr-avs-vs-pd-3-1\/\">USB PD 3.2 SPR AVS vs PD 3.1<\/a>, <a href=\"https:\/\/www.paiyipower.com\/usb-pd-3-2-vs-pd-3-1-140w-laptop-chargers\/\">USB PD 3.2 vs PD 3.1 for 140W laptop chargers<\/a>, <a href=\"https:\/\/www.paiyipower.com\/ai-pc-power-supply-oem\/\">AI PC power supply OEM<\/a>, <a href=\"https:\/\/www.paiyipower.com\/gan-power-adapters-beyond-phone-chargers\/\">GaN power adapters beyond phone chargers<\/a>.<\/em><\/p>\n<p><!-- faq-schema-v1 --><script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Why does my 140W charger only charge at 100W?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Almost always one of three things: a cable that is not an e-marked 5A EPR cable, a device that does not negotiate EPR, or power sharing with another port occupied. 100W is the top of the standard power range, and going above it needs the charger, cable and device to agree.\"}},{\"@type\":\"Question\",\"name\":\"How can I tell if my cable is the problem?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Try a known-good e-marked 5A cable. Ordinary and EPR cables look identical, so swapping the cable is the fastest test \u2014 and the cable is the cause in most cases.\"}},{\"@type\":\"Question\",\"name\":\"Is 100W the maximum for USB-C charging?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No \u2014 100W is the maximum of the standard power range. The extended power range goes much higher, up to 240W, but requires EPR-capable hardware at every link in the chain.\"}},{\"@type\":\"Question\",\"name\":\"Does a 100W cable limit a 140W charger?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, and it is the most common cause of this exact complaint. The charger will only deliver what the cable is rated and marked for, so a 100W cable caps the system no matter how capable the charger is.\"}},{\"@type\":\"Question\",\"name\":\"Why does charging drop when I plug in a second device?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because the charger has a fixed total budget and re-allocates it across ports. The rated wattage usually applies to a specific port configuration \u2014 often a single port \u2014 so the drop is the design working correctly, not a fault.\"}},{\"@type\":\"Question\",\"name\":\"Can firmware fix this?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Partly. Firmware governs how gracefully the charger re-negotiates and how cleanly it falls back, but it cannot exceed what the cable or device allows. Cutting a support ticket is a documentation job as much as a firmware job.\"}},{\"@type\":\"Question\",\"name\":\"What is SPR AVS and does it help here?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"SPR AVS is adjustable-voltage operation within the standard power range, added in the PD 3.2 revision, that lets the charger fine-tune voltage in small steps. It improves efficiency and reduces heat below 100W, though it does not raise the 100W ceiling itself.\"}},{\"@type\":\"Question\",\"name\":\"Do we need to claim PD 3.2 certification on the product page?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No \u2014 and we recommend against blanket certification claims. Write that the product is designed to the PD 3.2 specification including SPR AVS, and state certification per model and market, because status varies by SKU and batch.\"}},{\"@type\":\"Question\",\"name\":\"What MOQ and lead time apply for custom high-power chargers?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"From 200 pcs per model at Paiyi Power, with samples in about a week and first production 5\u20136 weeks after sample approval. Fix the protocol, cable and power-sharing behaviour before tooling; see what changes for 140W laptop chargers and our certification planning guide.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>140W Charger Only Charging at 100W? The Three Causes and How to Design Them Out Published: September 2026Reading time: 9 minAudience: charger and laptop brands, product and support engineers, and OEM\/ODM buyers who keep receiving &#8220;my 140W charger only charges at 100W&#8221; tickets By Han \u2014 Paiyi Power, an OEM\/ODM power supply manufacturer and GaN [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":1078,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[7],"tags":[],"class_list":["post-1417","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-services"],"_links":{"self":[{"href":"https:\/\/www.paiyipower.com\/pt\/wp-json\/wp\/v2\/posts\/1417","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.paiyipower.com\/pt\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.paiyipower.com\/pt\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.paiyipower.com\/pt\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.paiyipower.com\/pt\/wp-json\/wp\/v2\/comments?post=1417"}],"version-history":[{"count":0,"href":"https:\/\/www.paiyipower.com\/pt\/wp-json\/wp\/v2\/posts\/1417\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.paiyipower.com\/pt\/wp-json\/wp\/v2\/media\/1078"}],"wp:attachment":[{"href":"https:\/\/www.paiyipower.com\/pt\/wp-json\/wp\/v2\/media?parent=1417"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.paiyipower.com\/pt\/wp-json\/wp\/v2\/categories?post=1417"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.paiyipower.com\/pt\/wp-json\/wp\/v2\/tags?post=1417"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}